Removal

SUPPLEMENTAL RESTRAINT SYSTEM: REAR AIRBAG SENSOR: REMOVAL

HINT
* Use the same procedures for the RH side and LH side.
* The procedures listed below are for the LH side.

1. PRECAUTION

CAUTION:
Be sure to read "PRECAUTION" thoroughly before servicing Airbag System (for TMC Made) for TMC made, Airbag System (except TMC Made) except TMC made).

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.

3. REMOVE REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type) Removal

4. REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY (for Reclining Seat Type) Removal

5. REMOVE REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type) Removal

6. REMOVE REAR DOOR SCUFF PLATE (for Fold Down Seat Type) Removal

7. REMOVE REAR DOOR SCUFF PLATE (for Reclining Seat Type) Removal

8. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP (for Fold Down Seat Type)

9. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP (for Reclining Seat Type)

10. REMOVE ROOF SIDE INNER GARNISH (for Fold Down Seat Type) Removal

11. REMOVE REAR SIDE SEAT BACK ASSEMBLY (for Fold Down Seat Type) Removal

12. REMOVE RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY (for Reclining Seat Type) Disassembly

13. REMOVE REAR SEAT HEADREST ASSEMBLY (for Fixed Seat Type)

14. REMOVE REAR SEAT HEADREST ASSEMBLY CENTER (for Fixed Seat Type)

15. REMOVE REAR SEATBACK ASSEMBLY (for Fixed Seat Type) Removal

16. REMOVE REAR AIRBAG SENSOR

(a) Disconnect the connector.





(b) Remove the bolt and rear airbag sensor.