Disassembly

ENGINE HOOD / DOOR: REAR DOOR TRIM BOARD: DISASSEMBLY

1. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG

(a) Using a screwdriver with the tip wrapped with protective tape, disengage the 3 claws and remove the rear door inside handle bezel plug.





2. REMOVE DOOR ASSIST GRIP COVER

(a) Using a screwdriver with the tip wrapped with protective tape, disengage the 6 claws and remove the door assist grip cover.





3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY

(a) Remove the 3 screws.





(b) Using a clip remover, disengage the 7 clips.

(c) Raise the rear door trim board to disengage the 4 claws and remove the rear door trim board together with the rear door inner glass weatherstrip.





(d) Disconnect the connector.

(e) Disengage the 2 claws and disconnect the rear door inside handle sub-assembly.





(f) Disengage the clip as shown in the illustration and remove the No. 1 door scuff plate clamp from the rear door trim board.