Installation

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT SEAT SIDE AIRBAG ASSEMBLY (for Power Seat): INSTALLATION

1. INSTALL FRONT SEAT SIDE AIRBAG ASSEMBLY

CAUTION:
* The nuts must not be reused.
* Make sure that the seat frame assembly is not deformed. If it is, replace it with a new one.
(a) Install the front seat side airbag assembly with 2 new nuts.





Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(b) Connect the 2 clamps.





(c) Connect the 4 wire harness clamps to under the seat.

2. INSTALL FRONT SEPARATE TYPE SEAT BACK ASSEMBLY Reassembly

3. INSTALL FRONT SEAT HEADREST SUPPORT

4. INSTALL FRONT SEAT HEADREST SUPPORT

5. INSTALL FRONT SEAT BACK BOARD SUB-ASSEMBLY

6. INSTALL FRONT INNER SEAT CUSHION SHIELD

7. INSTALL FRONT SEAT INNER BELT ASSEMBLY Installation

8. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY

9. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

10. INSTALL RECLINING POWER SEAT SWITCH KNOB

11. INSTALL FRONT SEAT ASSEMBLY Installation

12. INSTALL INNER SEAT TRACK BRACKET COVER Installation

13. INSTALL SEAT TRACK COVER Installation

14. INSTALL FRONT SEAT HEADREST ASSEMBLY

15. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System for TMC made, Diagnosis System except TMC made).

16. INSPECT FRONT SEAT ASSEMBLY Installation